TJM Frontal Protection Bars

TJM manufacture a wide range of Aluminium and Steel Frontal Protection Bars that are carefully engineered for safety and practicality to meet the new Australian Design Standard AS4876.1-2002 , ADR 69 and SRS Air Bag compatibility. Attention to detail and refined features, quality of fit and finish, all add up to why TJM bars are the wise choice.

Why fit a frontal protection system?

* To minimise damage to the vehicle in the event of a collision with other vehicles or animals.
* To reduce the chance of the vehicle being immobilised as the result of a minor accident.
* To provide mounting points for winch, driving lights and communication aerials.
* To improve the appearance and value of the vehicle.

T1 Frontal Protection Bar

For a night on the town, cruising the open road, or indulging in a little recreational rough stuff, the TJM T1 Bar is perfect for today's sophisticated vehicle. This ultra modern, classy and stylish bar replaces the original bumper and always looks great.
* Available in alloy only.
* Driving lights are optional

T3 Frontal Protection Bar

The sleek design of this alloy bar has unique appeal. Replacing the original bumper the T3 frontal protection bar offers increased protection. Driving light mounting points are also a feature along with polyurethane bumperettes. O.E fog lights fit where applicable.
* Available in alloy and steel - selected models.
* Driving lights are optional.
* Winch compatible - selected models

T5 Frontal Protection Bar

These light weight bars are fitted with the original bumper retained and are ideal in situations where weight is an essential consideration. Careful consideration is given to ensuring a style that will achieve form and function according to specific vehicle characteristics.
* Available in alloy and steel - selected models.
* Driving lights are optional.

T11 Frontal Protection Bar

The TJM T11 Bars are a stylish and functional protection bar designed with a full width, one piece channel that fits over the original bumper. They are designed for increased protection to the bumper and grille of the vehicle, while still being light.
* Available in alloy only.
* Driving lights are optional.

T13 Frontal Protection Bar

This traditional no nonsense bar is designed for the serious off road commercial or agricultural user, and consists of a tapered channel replacing the original bumper to enhance the approach and departure angles. The T13 Bar in most cases is engineered to allow for fitment of a select range of winches. The raised centre section, on most bars, allows for fitment of large diameter driving lights. High Lift Jack Points are available on the 'Black Stallion' version of this bar.
* Available in steel only.
* Driving lights are optional.

T15 Frontal Protection Bar

The astute purchaser will not go past the stylish, rugged, versatile, no compromise TJM T15 Frontal Protection Bar; it has it all. Replacement channel for improved approach and departure angles. Large diameter raised centre section to accommodate driving lights and engineered for installation of most low mount winches. High Lift Jack Points are standard except on the 'Budget' range.
* Available in alloy and steel.
* Driving lights are optional.
* Budget range available
* Driving lights and winch are optional.

TJM SIDE BARS

TJM Steel Side Bars are designed in half and three quarter lengths, offering protection to vehicle body panels, wheel arches, flares and sills. The Side Bars are mounted directly to the chassis with TJM's unique mounting systems and neatly bolted to the bull bar with TJM Side Bar Clamps. Most TJM 3/4 Side Bars are available with steps for easy access to the vehicle.

TJM RB4 Rear Bar: Designed to fit a range of vehicles, the universal Rear Bar, manufactured from 63mm steel tubing, not only provides protection and style to the vehicle but also incorporates a tread plate step allowing easy access to vehicle tray. Towbars can be installed with RB4 rear bars on some vehicles.

Available in black powdercoat or optional colour painting.

TJM RB6 Rear Bar: A Single Tube Rear Bar, manufactured from 76mm steel tube, chassis mounted for strength and designed to provide additional protection to the rear of the vehicle. A fully welded ( NOT BOLTED ) checker plate step to access the rear of "tray back" vehicles is also a feature of this bar. A Class 4 towbar is incorporated into this rear bar as well as High Lift Jack Points.

Available in black powdercoat or optional colour painting.

TJM RB8 Rear Bar: Add style and protection to the rear of your 4WD with a TJM Replacement Rear Bumper designed to fit with most popular Class 4 towbars. Constructed from steel plate, the TJM Replacement Rear Bumpers are finished in black powdercoat, or as an option painted to match the vehicle. The tread plate step on top of most bars makes for easy access to the roof rack or rear of the vehicle. The moulded polyurethane components ensure the TJM rear bumper blends neatly to the vehicle profile. Where needed, ADR, DOT and ECE approved stop, tail and turn signals with wiring looms for easy connection to the vehicles wiring harness are supplied. High Lift Jack Points are also incorporated into this bar.

Available as an option are the LHS or RHS Tyre Carriers. Relocating the spare wheel from under the vehicle, the Tyre Carriers are available seperatley or can be fitted in combination, for an extra spare on those long expeditions. The easily opened Tyre Carrier Latch is fitted with a push button Safety Pin to prevent accidental opening of the latch.

Available in black powdercoat or optional colour painting.

TJM Spare Wheel Carrier: This TJM Wheel Carrier immediately provides greater ground clearance by allowing the relocation of the spare from under the vehicle. The unit, manufactured from steel and finished in Black powder-coat, is mounted directly to the chassis on either the left or right hand side of the vehicle, and offers some of the features illustrated above. A number plate relocation bracket is also provided where necessary.